Curt Trailer Brake Control w Custom Adapter for Ford F250SD, F350SD, 51120

Description

thehitchplace
Brake Controller w/ Custom Adapter
51120-
51432
2.
DISCOVERY BRAKE CONTROL
#51120
Increases brake power based on gain setting and sensitivity adjustment
Operates 2-8 trailer brakes at a time (1-4 axles)
No internal moving parts and no leveling required
Digital display shows power adjustments in 0.1 increments
Mounts anywhere in the vehicle, at any angle
Features fully adjustable power and ramp time
Compatible with low-voltage systems, PWM systems, ABS and cruise control
Equipped with a quick plug for fast, easy installation
Limited lifetime warranty
Notes
:
Includes mounting hardware
PRODUCT DETAILS
It takes a lot of power to stop a moving trailer, especially when that trailer is hauling a heavy load. On RVs, flatbeds, livestock trailers and many other oversize haulers, manufacturers typically install trailer brakes to assist the tow vehicle in bringing such a massive amount of weight to a halt. But it takes more than a good set of brakes to make quick, efficient stops. It takes precision and the right amount of control.
Discovery™ is a time-based brake controller, meaning it applies increasing brake pressure the longer your foot is on the brake pedal. This pressure is based on the gain setting and sensitivity adjustment set by the user. Discovery™ has a digital display for easy monitoring and the ability to manage up to four axles at a time. It mounts at any angle, anywhere in your vehicle and comes with an automatic power level adjustment feature to ensure you can stay better focused on your driving and spend less time worry about your trailer brakes. It is also compatible with anti-lock brakes, cruise control and is backed by a limited lifetime warranty.
All CURT brake controls are designed to work with quick plugs so that they can readily plug into your vehicle's original equipment socket. They also include a mounting bracket and hardware for easy installation. A brake controller should be mounted somewhere on the dash of your vehicle, and we recommend putting it below the steering wheel, either on the right or left side of the steering column. This way the control will not block your view when driving, but it will remain accessible and visible when adjustment is needed.
2. BRAKE CONTROL HARNESS
#51432
Only works w Curt Brake Controllers
Year
Make / Model / Style
Install Time
2009 - 2014
Ford, E-150 Econoline, All Styles
20 minutes
2009 - 2014
Ford, E-250 Econoline, All Styles
20 minutes
2009 - 2014
Ford, E-350 Econoline Super Duty, All Styles
20 minutes
2009 - 2011
Ford, E-350 Econoline Super Duty, RV Cutaway, w/Factory Tow Prep Plug
20 minutes
2009 - 2011
Ford, E-450 Econoline Super Duty, RV Cutaway, w/Factory Tow Prep Plug
20 minutes
2013 - 2014
Ford, Expedition, All Styles
2008 - 2016
Ford, F-250 Super Duty, All Styles
20 minutes
2008 - 2016
Ford, F-350 Super Duty, All Styles
20 minutes
2008 - 2016
Ford, F-350 Super Duty, Cab & Chassis
20 minutes
2008 - 2016
Ford, F-450 Super Duty, All Styles
20 minutes
2008 - 2016
Ford, F-450 Super Duty, Cab & Chassis
20 minutes
2008 - 2016
Ford, F-550 Super Duty, Cab & Chassis
20 minutes
2013 - 2014
Lincoln, Navigator, All Styles
20 minutes
Allows any CURT brake control to be plugged into OEM socket
Quick plug harness installs in less than ten minutes
Wire colors match standard brake control harnesses
Includes 24" of 12 gauge wire for flexible installation
Slit-loom sleeve keeps wires contained and protected
PRODUCT DETAILS
It takes a lot of power to stop a moving trailer, especially when that trailer is hauling livestock, construction materials, industrial equipment or other heavy-duty cargo. Play it safe when you tow and give your trailer brakes the control they need with a CURT trailer brake controller and brake control harness.
CURT quick plug brake control harnesses make the installation of your brake controller literally a snap. They are designed to allow your brake control to plug directly into your vehicle's power system using an original equipment connector. They are equipped with two plugs -- one that snaps into your vehicle's original equipment socket and the other that connects to any CURT brake controller, including Venturer, Discovery, Reflex and TriFlex. CURT quick plug harnesses install in less than 10 minutes to get you setup and on your way with time to spare. They include two feet of wire and a slit loom sleeve to keep wires well protected and contained.
This brake control adapter harness is compatible with certain years of the Lincoln Navigator, Ford Econoline van, Ford Expedition, Ford F250, F350, F450 and F550 Super Duty.