Fluke Power Quality Analyzer 433 434 435 DC Charger/Power Adapter Jack/Plug

Description

This is a genuine, original charger jack. This jack is proprietary to Fluke; you will not find it at any electronic parts supplier. The most common problem is the rear pin breaks off due to repeated insertions of the charger plug. The jack is connected to the main PCA only by the solder joint and is not fastened in a solid manner. Thus the jack is allowed to move slightly when the plug is inserted or removed. To overcome this problem and help prevent breakage of the replacement jack, we highly recommend using a bead of hot-melt glue between the jack and the gray input terminal assembly as show in the photo. This will give the jack a firm anchor so the pins do not take the full force of the plug.
This charger jack is compatible with these Fluke models:
192 Scopemeter
192B Scopemeter
192C Scopemeter
196 Scopemeter
196B Scopemeter
196C Scopemeter
199 Scopemeter
199B Scopemeter
199C Scopemeter
215C Scopemeter
225C Scopemeter
433 Power Quality Analyzer
434 Power Quality Analyzer
435 Power Quality Analyzer
Common symptoms of a broken jack are:
The plug icon never shows on the display indicating the charger is plugged in
New batteries won't charge
Intermittent connection between the charger and the unit (could also indicate a broken charger cord, which we have available as well)
We have many other Fluke Scopemeter parts and components available. Send us a message describing the parts you need.