Y-60 YTN-40 YTN-50 YTN-60 Vacuum Gauge Air Manometer Analog Pressure Gauge

Description

Vibration-resistant oil-filled pressure gauge YTN-40 YTN-50 YTN-60 Axial and radial double scale water pressure gauge
Color Classification:
Stainless steel housing oil-filled and vibration-resistant radial
Stainless steel housing, oil-filled, vibration-resistant, axial
All stainless steel oil-filled and vibration resistant radial
All stainless steel, oil-filled, vibration-resistant, axial
All stainless steel, oil-filled, anti-vibration, axial band edge
YTN-shock resistant pressure gauge product description
Specification: YTN-40/50/60
Accuracy: +2.5%
Measuring range: 0~15psi……….0~3500psi
Connector thread: 1/8'', 1/4'' NPT, BSPT, BSP, M10*1, M14x1.5
Installation method
Axial radial
Working conditions of seismic pressure gauge
1. Ambient temperature -40℃~+70℃
2. The working pressure static pressure measurement pressure value is between 1/3 to 3/4 of the upper limit pressure, and the measured pressure value should be between 1/3 to 2/3 of the upper limit pressure under fluctuating pressure conditions.
3. Relative humidity≤80%
4. Working vibration frequency ≤25Hz amplitude, ≤1mm medium vibration.
5. The meter must be installed vertically, and it is not allowed to pull the casing by hand during installation and disassembly.
Conversion of commonly used pressure units: 1Mpa=10bar=10.2kg/cm²=145psi
Pressure gauge purchase instructions
Choice of dial size
The dials of pressure gauges are as follows: 50mm 60mm 100mm Please choose the corresponding dial diameter according to your needs.
Selection of pressure range
The specifications of the pressure gauge are determined according to the pressure range. If the customer needs a pressure range of 0-6Mpa, select the corresponding gauge. If you are not sure, contact the owner to determine whether it is feasible! The pressure range is 0-0.1 0.16 0.25 0.4 0.6 1 1.6 2.5 4 6 10 16 25 40 60 etc.
Fittings (copper plating)
The size of the joint of the pressure gauge varies according to the size of the dial. The gauge diameter of 50 and 60 is M14x1.5, and the gauge diameter of 100 is M20x1.5.
Material selection
The material of the pressure gauge is divided into three types
General pressure gauge
Iron case, copper movement, copper joints
Stainless steel pressure gauge
Stainless steel case, copper movement, copper joints
All stainless steel pressure gauge
Stainless steel case Stainless steel movement Stainless steel connector
Selection of seismic conditions
The pressure gauge is divided into general pressure gauge and shock-proof pressure gauge according to the difference of earthquake resistance. The shock-proof pressure gauge is filled with damping oil (glycerin or silicone oil) and supporting buffer devices.
Choice of installation direction
The pressure gauge is divided into radial installation and axial installation. Radial installation refers to the installation of the dial and the ground in a vertical direction; and the axial installation refers to the installation of the dial and the ground in a horizontal state.
Choice of different degrees
Most of the pressure gauges have an accuracy level of 2.5 or 1.6
Packing: 1PC
Warranty period: 120 days
On Jul-27-20 at 19:16:05 PDT, seller added the following information: